• Via Ponte Pietra, 29, 42016 Guastalla RE
  • info@avio-sma.com
  • +39 0522 829336

SPORT and EXTREME

Available in two versions. This innovative aircraft designed for dynamic people is made entirely of aluminium alloy and technical fabric coverings.
Available in two versions -SPORT and EXTREME-, this innovative aircraft designed for dynamic people is made entirely of aluminium alloy and technical fabric coverings.
Safety is the key word behind the development of this aircraft, with a flight envelope that goes from 40 to 100 km/h and an anti-crash device designed to absorb impact in various flight conditions.
The aircraft immediately features very pronounced symmetrical biconvex wing profile and large aerodynamically-compensated ailerons. The very high thrust-to-weight ratio, combined with great manoeuvrability, make this aircraft fun and easy to fly.
  • The SPORT version is created to compete in the ultralight category with an empty weight of 120kg, while the EXTREME version is created for EXPERIMENTAL registration as an unlimited low-speed aerobatic aircraft.
  • Created to be assembled and disassembled in the field, and transported in MPV-type cars, this kit will be marketed in two variants, BASIC KIT and ADVANCE KIT, for both SPORT and EXTREME versions.
  • The main differences between the SPORT and ESTREME versions have to do with heavier aircraft structure due to the addition of localized reinforcements and the adoption adjustable gas-supplied suspensions for pre-load.
  • This aircraft aluminium structure is completely CNC-processed. Made of aluminium 6061-T6 Ergal 7075-type and aluminium 2024-type. The steel parts are made of 4130-type steel, and for the hardware and mechanical materials the following brands have been employed: AVEX, SCHAEFFLER, SKF, CONTENDER SAILCLOTH, ELANTAS, HUNTSMAN.
  • The aluminium tubes measuring 30x30x2 mm and 15x15x1 mm are produced as per AVIOSMA specifications.
  • The entire production process is customized and tracked by quality and control reports that are issued on each batch of material. E.g. casting, extrusion, drawing, heat treatment. The same goes for rolled and extruded alloys 2024 and 7075-type.
Peculiar attention was paid to safety during the design phase, as numerous simulation and prototypes were created in order to obtain progressive deformation of the structure in the event of crash.
The outcome of it is a fun aircraft to use in total safety.
AVIOSMA present

FUN-FLY STRATOS SPORT

FUN-FLY STRATOS SPORT

Minari Engine STRATOS 400
2-stroke type
Engine size: 388cc
Diameter and stroke: 66x56.8
Compression ratio: 11:1
Max Power: 50 HP at 8000 Rpm
Belt reduction: 1:3.1 Poly-V belt
Mikuni BN44/40-8052 diaphragm mono-carburetor
Electronic ignition with variable advance
Electric starter
Fixed point thrust: 110 kg
Three-bladed propeller AS17/3, diameter: 1710 mm
Ultralight type – 3-axis and taildragger
Length: 5300mm
Wingspan: 7300mm
Height: 2000 mm
Tank capacity: 15 litres
Empty weight: 110 kg
Maximum take-off weight: 300 kg
Maximum speed: 100 km/h
Stalling speed: 35 km/h
Manoeuvring speed: from 40 to 100 km/h
Roll rate: 250 degrees/sec
Take-off / Landing run: 10/20 metres
Load factor: 300kg (+ 4 – 2)
Thrust to weight ratio: 220 kg (1:2)
Ballistic parachute
AVIOSMA present

FUN-FLY AS993 EXTREME

FUN-FLY AS993 EXTREME

AVIOSMA Engine AS993
2-stroke type
Engine size: 993CC
Diameter and stroke: 90x78
Compression ratio: 10:1
Max Power: 135 HP at 6800 Rpm
Belt reduction: 1:4 Poly-V belt
BN46-42-8002 double-diaphragm carburetor
Electronic ignition with variable advance
Electric starter
Fixed point thrust: 370kg
Two-blade propeller AS25/2, diameter: 2550 mm
Ultralight type – 3-axis and taildragger
Length: 5300mm
Wingspan: 7300mm
Height: 2000 mm
Tank capacity: 20 litres
Empty weight: 150 kg
Maximum take-off weight: 300 kg
Maximum speed: 100 km/h
Stalling speed: 35 km/h
Manoeuvring speed: from 40 to 100 km/h
Roll rate: 250 degrees/sec
Take-off / Landing run: 10/20 metres
Load factor: 300kg (+ 6 – 4)
Thrust to weight ratio: 250 kg (1:0.7)
Ballistic parachute

Eng. Michelangelo Antonelli
Let Us Know 24/7

Suscribe to Our Newsletter

A division of S.M.A. SRL
Via Ponte Pietra 29/B-29/C
42016 Guastalla [RE] Italy
Tel. +39 (0)522 829336
VAT IT02431110200
©2024 AVIO-SMA is a Division of the SMA group -  All rights reserved